1005-01-667-9400

3040-15-103-0376 3040151030376 151030376 is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. a shaft is not included. it usually is part of a camshaft (as modified).

6625-00-103-0376 6625001030376 001030376

3040-33-103-0376 3040331030376 331030376 is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or sholders may be machined to accommodate bearings couplings and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to transmit motion see shaft(1), shoulder. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1),straight; and axle(1), straight.

1560-99-103-0376 1560991030376 991030376 HOUSING,PEDAL CONTR

1005-25-103-0376 1005251030376 251030376 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.