1005-01-663-7582

//www.nsnlookup.com /nato/nato-stock-numbers/inc Gun Component Retainer (INC 48716) Oct 2014 1005-01-663-7582

5310-01-240-0406 5310012400406 012400406 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5965-14-240-0406 5965142400406 142400406

6145-00-240-0406 6145002400406 002400406

2002 1005-01-632-6520 Gun Component Retainer DAMT0023RNCC: 3 | RNVC: 2 | DAC: 4 27 Oct 2014 1005-01-663-7582