1005-34-030-5300

702-1362 5440-98-104-0345 5440-98-104-0343 5440-12-306-5542 5440-98-104-0347 5440-22-603-5352 5440-21-861

DAC: 4 13 May 2003 1005-34-041-1430 Decocking Lever 31BRNCC: 6 | RNVC: 9 | DAC: 9 21 Nov 2011 1005-34-030-5300

1075-15-067-3128 1075150673128 150673128 PIASTRA FISSAGGIO T

5365-99-880-3540 5365998803540 998803540 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.

5306-01-133-5813 5306011335813 011335813 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.