1005-12-375-9026

may be provided with a hood or protective wings. https//www.nsnlookup.com /fsg-10/fsc-1005/de 1005-12-375-9026
Front Sight 1005123759026 123759026,233210 1005-12-375-9026 1005123759026 123759026 is a metallic

2 25 Apr 1991 1005-27-011-0370 Front Sight 9990061796RNCC: 2 | RNVC: 1 | DAC: 3 18 Jun 2002 1005-12-375-9026

5315-15-052-1433 5315150521433 150521433 is a half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. its ends are separable or one end is bent to hold it in place.

5310-14-492-9236 5310144929236 144929236 RONDELL

5975-00-581-4166 5975005814166 005814166 is an item fabricated in the form of an elbow and having both ends threaded female, or with unthreaded connecting facilities on both ends, or connecting facilities on both ends, one of which is a male thread without boss or shoulder. if a locknut or bondnut is included, it shall not be considered as a thread boss or shoulder. it is primarily intended to connect conduit to conduit. it may have a removable cover to facilitate pulling wires, but does not include facilities for mounting wiring devices. for items having a removable cover to facilitate pulling wires and specifically designed for close installation in exposed outdoor locations and which may have facilities for an outside driven ground, see entrance elbow, electrical. for items with one end having a male thread with a boss or shoulder, see box connector, electrical. for items having a removable screw cap for pulling wires, with the cap positioned 45 degrees from the connection facilities, see entrance elbow, electrical. for items fabricated in the form of an elbow having both ends threaded male, see bend, electrical conduit.