1005-12-315-8147

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Tripod Mount Leg (INC 22842) Mar 2002 1005-12-315-8147

11 Jul 1995 1005-25-150-4445 Tripod Mount Leg A0010229RNCC: 3 | RNVC: 2 | DAC: 9 15 Mar 2002 1005-12-315-8147

5365-12-315-9366 5365123159366 123159366 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.

5365-12-315-9365 5365123159365 123159365 is a metal or plastic item of various shapes with two flat bearing surfaces. it is designed to maintain a predetermined distance between parts of an assembly. the item has one or more through holes parallel to its axis, and is unthreaded.