1005-12-307-0721

Documents 1005-12-374-9927 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-10/fsc-1005/de 1005-12-307-0721
Rifle Barrel 1005123070721 123070721,224655 https//www.nsnlookup.com /nato/nato-stock-numbers/inc

3040-12-341-5839 3040123415839 123415839 is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or sholders may be machined to accommodate bearings couplings and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to transmit motion see shaft(1), shoulder. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1),straight; and axle(1), straight.

DAC: 3 1 Sep 2009 1005-12-374-9927 Rifle Barrel 234844RNCC: 3 | RNVC: 2 | DAC: 1 10 Apr 2008 1005-12-307-0721

3040-12-312-2575 3040123122575 123122575 is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. it is not designed for use in aliging by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items not having the above conditions see pin, straight, headless. for items used to transmit motion see shaft, straight. for items having machined ends which constitute steps see axle(1), sholdered. excludes shaft(1), shouldered; and bolt, fluid passage.

CAGE F7244 David Brown France Engrenages in Thann, France