1005-12-050-6824
Flat Washer
1005120506824 120506824
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. View more Flat Washer
January 2024
1
Marketplace 1005-12-050-6824
Request a Quotation from participating marketplace vendors
Related Documents 1005-12-050-6824 5+ Documents (More...)
Flat Washer 1005120506824 120506824 Breech Bolt Control Device 1005-12-050-6824 30mm from Germany
Flat Washer 1005120506824 120506824 -050-6824 https//www.nsnlookup.com /fsg-10/fsc-1005 Guns, through
30mm from Germany (DE) Compression Helical Spring 1005-12-187-2404 Breech Bolt Control Device 1005-12-050-6824