TM-9-2350-273-BD M60 M48 Battle Damage Assessment and Repair Download
Page 97 of 288
TM 9-2350- 273-BD POWERTRAIN/STEERING Procedural Steps (Cont’d) 3. Remove cap frorn converter control valve located on side of valve body. 4. Pull out piston and spring inside valve body. 5. Remove the spring but leave existing washers on piston. 6. Install the two washers, removed from hydraulic power pack, on top of the existing washers. 7. Re-install spring on piston and place the large diameter end of piston in the cap. 8. Insert the piston and cap into the valve body and re-tighten the cap. 9. Record the BDAR action taken. When the [mission is completed, as soon as practicable, repair tank using standard maintenance procedures. 7-4