TM-9-2350-273-BD M60 M48 Battle Damage Assessment and Repair Download
Page 186 of 288
TM 9-2350-273-BD COMMUNICATIONS SYSTEM Procedural Steps (Cont'd) 3. Use another jumper cable of at least 12-gauge wire, and attach both the black and the green wires in this power cable to the negative side of the power supply. (Point B.) 4. Install the R-123M onto the MT-1029, and tie down with rope or web sling. 5. Remove the outer cover on the female end of the UC-273 connector to make it a male connector and insert it into the antenna connection point located on the right side of the R-123M immediately below the AHTEHHA sign. Attach the RF cable. NOTE o Frequency must be set manually on the MX6707. If possible use the auxiliary antenna. o Use the four-conductor wire to hook up either a H- 189 handset or a CVC helmet to the Soviet chest plate. 11-31