TM-9-2350-273-BD M60 M48 Battle Damage Assessment and Repair Download
Page 123 of 288
TM 9-2350-273-BD TRACK AND SUSPENSION Other Options ● Weld broken or damaged arm Procedural Steps: 1. Release track tension. 2. Remove damaged components. 3. If roadwheel arm is not in a critical position, tie it UP to eliminate interfering with the track. 4. If the roadwheel arm is damaged in a critical position, remove a roadwheel arm from a non-critical position and install it in the critical position. NOTE Replacement arms without shock absorber mounts can be used in positions normally equipped with shock absorbers. Vehicle stability will be greatly decreased. 5. If the roadwheel arm used is from 3, 4, or 5 position and is being used to replace 1, 2, or 6 position, cut the shock strut attachment from the damaged arm and weld it to the replacement arm. 6. Reconnect and tension track. 7. Record the BDAR action taken. When the mission is completed, as soon as practicable, repair tank using standard maintenance procedures. 9-19. ROADWHEEL ARM HOUSING BOLTS SHEARED General Information The roadwheel arm housing can be damaged by travel over desert or rocky terrain or mine damage. Limitations: ● None, if all bolts are installed ● Degraded mobility if all bolts are not available Personnel/Time Required ● 3 soldiers ● 2 hours 9-14