TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 95 of 772
TM 9-2350-260-20-1-2 MAIN OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 4 of 5) 3. Using pliers, cut lockwire (F) and remove lockwire (F) from nut (G) and tube (H). 4. Using 1-1/2 inch wrench, remove nut (G) from tube (H). 5. Remove 42 washers (J) and 42 filter elements (D) from tube (H). 6. Clean elements (D) with dry cleaning solvent (Item 54, Appendix D) and dry. Replace damaged elements and washers (J). ASSEMBLY: 1. Install 42 elements (A) and washers (B) onto tube (C) as shown and check fit for seal. 2. Install nut (D) onto tube (C) and fasten with lockwire (Item 60, Appendix D) (E) through nut (D) and tube (C). 3. Install body (F) onto tube (C) with new gasket (G) and bolt (H). 4. Using 9/16 inch socket and torque wrench, tighten bolt (H) to 150-200 lb-in (17-23 N•m). 5. Fasten bolt (H) with lockwire (J) to handle mount. Go on to Sheet 5 TA147472 6-18