TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 93 of 772
TM 9-2350-260-20-1-2 MAIN OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 2 of 5) REMOVAL: 1. Place rags (Item 65, Appendix D) under oil filters to catch drained oil. 2. Using 1/2 inch socket, remove six self-locking nut and flat washes (A) from oil filter (B). Throw self- locking nut away. 3. Using 1/2 inch wrench, loosen stop bolt (C). 4. Install two jackscrews (D) into oil filter (B). 5. Using 1/2 inch socket on jackscrews (D), turn jackscrews evenly into filter (B) to separate filter from housing. When filter is separated from housing, remove both jackscrews from filter (B). 6. Grasp handle (E) by hand and pull filter (B) out of housing to stop bolt and let oil drain out of housing into container. 7. Remove filter (B) from housing and throw away gasket (F) on housing. Go on to Sheet 3 TA147470 6-16