TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 92 of 772
TM 9-2350-260-20-1-2 MAIN OIL FILTER REPLACEMENT (2A ENGINE) (Sheet 1 of 5) PROCEDURE INDEX PROCEDURE PAGE Removal 6-16 Cleaning and Inspection 6-17 Disassembly 6-17 Assembly 6-18 Installation 6-19 TOOLS: 1/2 in. socket with 1/2 in. drive Diagonal cutting pliers 1/2 in. combination box and open end wrench 9/16 in. combination box and open end wrench Jackscrew 5/16 in. - 24NC x 3 in. (2 required) 1/2 in. socket with 3/8 in. drive Torque wrench with 3/8 in. drive (0-200 lb-in) (0-23 N•m) 9/16 in. socket with 3/8 in. drive Ratchet with 1/2 in. drive SUPPLIES: Rags (Item 65, Appendix D) Dry cleaning solvent (Item 54, Appendix D) Engine oil (Item 43, Appendix D) Lockwire (Item 60, Appendix D) Container to catch drained oil Gasket (8725203) Self-locking nuts (503345) (6 required) REFERENCES: TM 9-2350-260-10 LO 9-2350-260-12 PRELIMINARY PROCEDURES: Traverse turret to access engine access cover (TM 9-2350-260-10) Remove upper engine access cover (page 16-44) Go on to Sheet TA147469 6-15