Sign up to sell your inventory with NSN Lookup

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 87 of 772

TM 9-2350-260-20-1-2 TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4) REMOVAL: 1. Using diagonal cutting pliers, cut safety wire (A) and remove It from bushing (B) and bracket (C). 2. Using 3-1/8 inch socket and T-slide wrench, remove bushing (B) from bracket (C). 3. Using resilient mount mechanical puller (Item 34, Chapter 3, Section I), remove two mounts (D) from bracket (C). 4. Using bit screwdriver to hold screw (E), use 14/16 inch wrench to remove self-locking nut (F) from screw(E). Throw nut away. 5. Remove screw (E) and roller (G) from bracket (C). 6. With second person using 1-1/2 inch wrench to hold bolt (H), use 1-1/2 inch socket and extension to remove nut (J) from bolt (H). 7. Remove lockwasher (K) and bolt (H) from bracket (C). Throw lockwasher away. Go on to Sheet 3 TA147464 6-10