TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 85 of 772
TM 9-2350-260-20-1-2 ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 3) INSTALLATION: 1. Position bolt (A) through bracket (B) and install nut (Q). Using 1-1/16 inch wrench to hold nut (C) and 1-1/8 inch socket, tighten bolt (A). 2. Position bolt (D) through new lockwasher (E), bracket (B), mount (F), mounting (G), mount (H), and bushing (J). Use 1-1/8 inch socket to tighten bolt (D) while holding bushing (J) with 3/4 inch drive T-slide and 36 inch extension bar. 3. Using 1/2 inch socket, install two screws (K) through new lockwashers (L) and bracket (M) into mounting (G). 4. Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40). End of Task TA147463 6-8