TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 83 of 772
TM 9-2350-260-20-1-2 ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3) TOOLS: 1-1/16 in. open end wrench 1-1/8 in. socket with 3/4 in. drive Ratchet with 3/4 in. drive 1/2 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 36 in. extension with 3/4 in. drive T-slide handle with 3/4 in. drive SUPPLIES: Dry cleaning solvent (Item 54, Appendix D) Rags (Item 65, Appendix D) Lockwasher (MS35338-45) (2 required) Lockwasher (MS35338-51) PRELIMINARY PROCEDURE: Remove powerplant (page 5-1) NOTE Removal and installation of left and right engine mounts are the same. REMOVAL: 1. Using 1/2 inch socket, remove two screws (A) and lockwashers (B) from bracket (C). Throw lockwashers away. Go on to Sheet-2 TA147461 6-6