TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 761 of 772
TM 9-2350-260-20-1-2 CENTRIFUGAL FAN HOUSING REPLACEMENT (Sheet 1 of 3) TOOLS: 1/2 in. socket with 1/2 in. drive 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive Feeler gage 9/16 in. combination box and open end wrench (2 required) SUPPLIES: Lockwasher (MS35338-46) (8 required) Self-locking nuts (MS21044N6) (2 required) PRELIMINARY PROCEDURES: Remove top deck (page 16-20) Remove engine shroud (page 9-2) CAUTION Do not drop screws or lockwashers into fan housing as damage to fan could result REMOVAL: 1. Using 9/16 inch socket, remove eight screws and lockwashers (A) holding two fan housings (B) to engine (front end and flywheel end). Throw lockwashers away. Go on to Sheet 2 TA146905 9-59