Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 759 of 772

TM 9-2350-260-20-1-2 ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 7 of 8) 10. Position two pieces of fan housing (J) onto powerplant. 11. Using two 9/16 inch wrenches, install two screws, washers, and self-locking nut (K) securing two pieces of fan housing (J) together. 12. Using 9/16 inch socket, install four screws and new lockwashers (L) securing fan housing (J) to fan shroud (A). 13. Using hands, position fan (M) onto engine. 14. Using 1-1/4 inch socket, install washer (N) and nut (P) securing fan (M) to engine. 15. Using 1-1/4 inch socket and torque wrench, tighten nut (P) to 50-55 lb-ft (68-75 N•m). 16. Back nut (P) off until slot in nut (P) alines with hole in shaft. Using pliers, install new cotter pin (Q). Go on to Sheet 8 TA146903 9-57