TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 755 of 772
TM 9-2350-260-20-1-2 ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 3 of 8) 8. Using pliers, remove cotter pin (J) from nut (K). Throw cotter pin away. 9. Using 1-1/4 inch socket, remove nut and washer (K) securing rear fan (L) to engine. 10. Lift fan (L) from engine. NOTE Four nuts (N) are located under fan shroud and hold fuel line clamps. When nut (N) and screws (P) are removed, clamps will remain on fuel line. 11. Using 1/2 inch socket, remove three screws (M). 12. Using 1/2 inch wrench to hold nuts (N), use 1/2 inch socket and remove four screws (P) and nuts (N). 13. Using 1/2 inch socket, remove five screws (Q) securing shroud (D) to engine. Go on to Sheet 4 TA146899 9-53