TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 754 of 772
TM 9-2350-260-20-1-2 ENGINE COOLING FAN SHROUD REPLACEMENT (Sheet 2 of 8) REMOVAL: 1. Using 1/2 inch socket, remove ten bolts (A) securing two cover plates (B). 2. Remove two cover plates (B). 3. Using 9/16 inch socket, remove eight bolts and lockwashers (C) securing fan guards to shroud (D). Throw lockwashers away. 4. Remove fan guards (E) from shroud (D). 5. Using 1/2 inch socket, remove two bolts (F). NOTE To gain access to bolts (G) and nuts (HN reach through holes in shroud rails. 6. Using 1/2 inch socket, remove two bolts (G). 7. Using 1/2 inch socket, remove 12 nuts (H). Go on to Sheet 3 TA146898 9-52