TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 750 of 772
TM 9-2350-20-20-1-2 ENGINE COOLING FAN REPLACEMENT (Sheet 2 of 4) CAUTION Do not drop screws and lockwashers into fan assembly. NOTE Both engine cooling fans are replaced the same. REMOVAL: 1. Using 9/16 inch socket, remove four screws and lockwashers (A) holding fan cover (B) to engine. Throw lockwashers away. 2. Remove fan cover a). 3. Using slip joint pliers, remove cotter pin (C) and throw away. 4. Using 1-1/4 inch socket, remove hex nut and fiat washer (D) holding fan to shaft (E). 5. Remove assembled fan and hub (D) from shaft (E). Go on to Sheet 3 TA146894 9-48