TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 75 of 772
TM 9-2350-260-20-1-2 2A ENGINE AND 2D ENGINE POWERPLANT TESTS (GROUND HOP) (Sheet 14 of 16) ENGINE FUEL LEAK CHECK: 1. Remove engine shroud (page 9-2). 2. Remove right bank engine access coves 2A engine (page 6-77) or 2D engine (page 6-79). 3. Remove left bank engine access coves 2A engine (page 6-84) or 2D engine (page 6-88). 4. Remove cooling fans (page 9-48). 5. Install spacer (Item 2, Chapter 3, Section I) onto each fan drive shaft. 6. Using 1-1/4 inch socket, install cooling fan nut. 7. Using torque wrench and 1-1/4 inch socket, tighten cooling fan nut to 45-55 lb-ft (61-75 N•m). Go on to Sheet 15 TA147965 5-65