TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 748 of 772
TM 9-2350-260-20-1-2 TRANSMISSION SHROUDS REPLACEMENT (Sheet 8 of 8) Left Intermediate Shroud Replacement TOOLS: 1/2 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 1/2 in. combination box and open end wrench PRELIMINARY PROCEDURES: Remove powerplant (page 5-1) Remove oil filler (upper) tube (page 6-41) REMOVAL: 1. Using socket and wrench, remove assembled washer bolt (A). 2. Using wrench or socket, remove seven screws and washers (B) securing intermediate shroud (C) to engine. 3. Remove intermediate shroud (C). INSTALLATION: 1. Position intermediate shroud (C) into place on engine. 2. Install seven screws and washers (B) to secure intermediate shroud (C) to engine. 3. Install assembled washer bolt (A). 4. Using wrench and socket, tighten screws (A) and (B). 5. Install engine oil filler tube (page 6-43). 6. Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40). End of Task TA146892 9-46