TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 740 of 772
TM 9-2350-260-20-1-2 TRANSMISSION SHROUD SUPPORTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1) TOOLS: Ratchet with 1/2 in. drive 9/16 in. socket with 1/2 in. drive 2 in. extension with 1/2 in. drive SUPPLIES: Lockwasher (MS35338-46) (3 required) PRELIMINARY PROCEDURE: Remove transmission shroud (page 9-20) REMOVAL: 1. Using socket, remove three screws, washers, and lockwashers (A) holding (left or right) supports (B) to hull wall. Throw lockwashers away. 2. Remove supports from tank. INSTALLATION: 1. Position supports (B) (left or right) on hull wall bracket and attach supports with three screws, washers, and new lockwashers (A). 2. Using socket, tighten three screws, washers, and lockwashers (A). 3. Install transmission shroud (page 9-23). End of Task TA146884 9-38