TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 734 of 772
TM 9-2350-260-20-1-2 TRANSMISSION SHROUD BRACKET REPAIR (Sheet 1 of 6) PROCEDURE INDEX PROCEDURE PAGE Disassembly 9-32 Assembly 9-35 TOOLS: Putty knife Ratchet with 1/2 in. drive 7/16 in. socket with 1/2 in. drive Cross-tip screwdriver, No. 2 Flat-tip screwdriver SUPPLIES: Dry cleaning solvent (Item 54, Appendix D) Silicone adhesive (Item 7, Appendix D) Rags (Item 65, Appendix D) Lockwasher (MS35338-25) ( required) Lockwasher (MS35336-26) (2 required) Lockwasher (MS35336-27) (7 required) PRELIMINARY PROCEDURE: Remove shroud support (page 9-38) DISASSEMBLY: 1. Using cross-tip screwdriver, remove four screws (A) and lockwashers (B) holding retainer (C) to bracket (D). Throw lockwashers away. 2. Using flat-tip screwdriver, remove retainer (C), seal (E), and retainer (F) from bracket (D). Go on to Sheet 2 TA146878 9-32