TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 728 of 772
TM 9-2350-260-20-1-2 TRANSMISSION SHROUD REPAIR (Sheet 1 of 6) PROCEDURE INDEX PROCEDURE PAGE Disassembly 9-27 Cleaning and Inspection 9-29 Assembly 9-30 TOOLS: 7/16 in. combination box and open end wrench Diagonal cutting pliers Ratchet with 1/2 in. drive 7/16 in. socket with 1/2 in. drive 3/4 in. socket with 1/2 in. drive 3/4 in. combination box and open end wrench Putty knife Slip joint pliers Ball peen hammer Cold chisel Speeder brace with 1/2 in. drive SUPPLIES: Lockwire (Item 59, Appendix D) Dry cleaning solvent (Item 54, Appendix D) Rags (Item 65, Appendix D) Lockwasher (MS35338-44) (6 required) Self-locking nut (MS20500-428) (10 required) Self-locking nut (MS20500-820) (6 required) Key washer (10873733) (4 required) PRELIMINARY PROCEDURE: Remove transmission shroud (page 9-20) Go on to Sheet 2 TA146872 9-26