TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 720 of 772
TM 9-860-260-20-1-2 TURBOCHARGER SHROUDS REPLACEMENT (Sheet 6 of 6) Upper Shroud Replacement (Sheet 1 of 1) TOOLS: 1/2 in. combination box and open end wrench 1/2 in. socket with 1/2 in. drive 5 in. extension with 1/2 in. drive Ratchet with 1/2 in. drive SUPPLIES: Self-locking nut (MS21045-16) PRELIMINARY PROCEDURES: Remove powerplant (page 5-1) Remove engine shroud (page 9-2) Remove rear engine shroud support (page 9-4) NOTE Procedures for replacement of the left or right turbocharger shrouds are similar. Procedures for the left side are shown. REMOVAL: 1 Using 1/2 inch socket with extension and 1/2 inch wrench, remove bolt and self-locking nut (A). Throw self-locking nut (A) away. 2. Using 1/2 inch socket, remove three bolts (B). 3. Remove upper shroud (C). INSTALLATION: 1. Position upper shroud (C) in place. 2. Install three bolts (B). 3. Install bolts and new self-locking nut (A). 4. Using 1/2 inch socket with extension and 1/2 inch wrench, tighten bolts (A) and (B). 5. Install rear engine shroud support (page 9-5). 6. Install engine shroud (page 9-3). 7. Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40). End of Task TA146864 9-18