TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 719 of 772
TM 9-2350-260-20-1-2 TURBOCHARGER SHROUDS REPLACEMENT (Sheet 5 of 6) Outer Shroud Replacement (Sheet 1 of 1) TOOLS: 1/2 in. combination box and open end wrench 1/2 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive SUPPLIES: Self-locking nut (503345) (4 required) PRELIMINARY PROCEDURE: Remove powerplant (page 5-1) REMOVAL: NOTE Procedures for replacement of the left or right turbocharger shrouds are similar. Procedures for the left side are shown. 1. Using 1/2 inch socket and 1/2 inch wrench, remove four screws and self-locking nuts (A) securing outer shroud (B). Throw self-locking nut away. 2. Remove outer shroud (B). INSTALLATION: 1. Position outer shroud (B) to turbocharger. 2. Install four screws and self-locking nut (A) to secure outer shroud (B) to turbocharger. 3. Using 1/2 inch socket and 1/2 inch wrench, tighten screws and self-locking nuts (A). 4. Install 2A powerplant (page 5-14) or 2D powerplant (page 540). End of Task TA146863 9-17