TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 717 of 772
TM 9-2350-260-20-1-2 TURBOCHARGER SHROUDS REPLACEMENT (Sheet 3 of 6) Inner Shroud Replacement INSTALLATION: 1. Place inner shroud (A) into position. 2. Install new grommet (B) on hose assembly (C). 3. Install grommet (B) and hose assembly (C) in inner shroud (A). 4. Install three screws and washers (D) securing inner shroud (A) to oil cooler frame. 5. Install screw and new self-locking nut (E) to secure inner shroud (A) to upper shroud (F). 6. Install four screws and washers (G) securing inner shroud (A) to turbocharger plate. 7. Using 1/2 inch socket, tighten four screws (G). 8. Using 1/2 inch socket with extension, tighten three screws (D). 9. Using 1/2 inch socket and 1/2 inch wrench, tighten screw and nut (E). 10. Connect hose assembly (C) to elbow (H). Using 11/16 inch wrench, tighten hose assembly (C) onto elbow (H). Go on to Sheet 4 TA146862 9-15