TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 709 of 772
TM 9-2350-260-20-1-2 ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 2 of 5) 3. Using screwdriver, remove two screws and lockwashers (D) hidden under seal, holding retainers (E) to engine shroud right and left sides. Throw lockwashers away. 4. Remove retainers (E) from shroud. 5. Displace seals (B) from shroud right and left sides. 6. Using 7/16 inch socket, remove six screws, washers, and lockwashers (F) holding two elbow retainers G) to engine shroud. Throw lockwashers away. 7. Remove retainers (G) from engine shroud. 8. Remove seals (H) and elbows (J) from engine shroud. 9. Using screwdriver, lift front seal (K) and remove two screws and lockwashers (hidden) (L) holding retainer (M). Throw lockwashers away. 10. Remove retainer (M) from shroud. 11. Remove seal (K) from shroud. Go on to Sheet 3 TA146854 9-7