TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 708 of 772
TM 9-2350-260-20-1-2 ENGINE SHROUD REPAIR ON THE ENGINE (Sheet 1 of 5) PROCEDURE INDEX PROCEDURE PAGE Disassembly 9-6 Assembly 9-8 TOOLS: Ratchet with 1/2 in. drive 7/16 in. socket with 1/2 in. drive 9/16 in. socket with 1/2 in. drive 3 in. extension with 1/2 in. drive Putty knife Cross-tip screwdriver (Phillips) SUPPLIES: Adhesive (Item 4, Appendix D) Dry cleaning solvent (Item 54, Appendix D) Rags (Item 65, Appendix D) Lockwasher (MS35338-46) (29 required) Gasket (8762922) (2 required) PRELIMINARY PROCEDURES: Remove top deck assembly (page 16-20) Remove transmission shroud (page 9-20) DISASSEMBLY: 1. Using 7/16 inch socket, remove seven screws, washers, and lockwashers (A) holding three seal (B) retainers (C) to engine shroud right and left sides. Throw lockwashers away. 2. Remove retainers (C) from shroud. Go on to Sheet 2 TA146853 9-6