TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 700 of 772
TM 9.2350-260-20-1-2 EXHAUST PIPE (RIGHT SIDE) REPLACEMENT (Sheet 2 of 4) REMOVAL: 1. Using adjustable wrench to hold elbow (A), use 7/8 inch wrench and loosen fitting (B). 2. Using hammer, tap elbow (A) and lift tube (C) from exhaust pipe. 3. Using socket and open end wrench, remove six self-locking nuts (D) holding exhaust pipe (E) to turbosupercharger housing (F). Remove exhaust pipe (E) with insulation halve (G) and gasket (H) from turbosupercharger housing (F). Throw gasket (H) and self-locking nut (D) away. 4. Using cross-tip screwdriver and 5/16 inch wrench, remove 14 screws (J), each with two flat washes (K, one lockwasher (L), and one nut (M) holding insulation halves (G) to exhaust pipe (E). Throw lockwashers (L) away. 5. Using fiat-tip screwdriver, remove clamp (N) from pacing (P). Remove packing (P) from pipe (E). 6. Remove insulation halves (G) from exhaust pipe (E). Go on to Sheet 3 TA146426 8-10