TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 696 of 772
TM 9-2350-260-20-1-2 EXHAUST PIPE (LEFT SIDE) REPLACEMENT (Sheet 2 of 4) REMOVAL: 1. Using flat-tip screwdriver, loosen screw (A) holding clamp (B) onto tube (C). 2. sing socket, remove six self-locking nub (D) holding exhaust pipe (E) to turbosuperchager hosing (F). Throw self- locking nuts (D) away. 3. Sliding exhaust pipe extension (G) out of tube (C), remove exhaust pipe (E) with insulation halves (H) and gasket (J) from turbosupercharger housing (F). Throw gasket (J) away. Using cross-tip screwdriver and wrench, remove 14 screws (K), each with two flat washers (L), one lockwasher (M), and one nut (N) holding insulation halves (H) to exhaust pipe (E). Throw lockwashers (M) away. 5. Using flat-tip screwdriver, remove clamp (P) from packing (Q). Remove packing (Q) from pipe (E). 6. Remove insulation halves (H) from exhaust pipe (E). Go on to Sheet 3 TA146422 8-6