Sign up to sell your inventory with NSN Lookup

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 689 of 772

TM 9-2350-260-20-14 BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 5 of 6) INSTALLATION: 1. Slide new gasket (A) and plate assembly (B) over tachometer cable (C), brake rod (D), and accelerator rod (E). 2. Position gasket (A) and plate assembly (B) on bulkhead (F). 3. Using 9/16 inch socket, install six screws and new lockwashers (G) to secure plate assembly (B) to bulkhead (F). 4. Install boot (H), bushing (J), and clamp (K) onto tachometer cable (C). 5. Slide boot (H) back on tachometer cable (C) until it contacts bulkhead (F). 6. Apply a coat of adhesive (Item 4, Appendix D) to outer surface of boot (H). 7. Position boot (H) into plate assembly (B). 8. Hold tachometer cable (C) and slide bushing (J) back and into boot (H). 9. Position clamp (K) over boot (H) and into groove. Using flat-tip screwdriver, secure clamp (K). Go on to Sheet 6 TA148526 7-420