Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 688 of 772

TM 9-2350-260-20-1-2 BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 4 of 6) DISASSEMBLY: 1. Using screwdriver, pry out seal (A). Throw seal away. 2 Using hammer and 1-1/8 inch drive punch, remove bushing (B) Throw bushing away. 3. Using 3/8 inch wrench, remove lubrication fitting (C). ASSEMBLY: 1. Using hammer and 1-1/8 inch drive punch, install bushing (A) into plate sleeve. Center bushing (A) in sleeve. NOTE Install seals (B) with sealing lips facing same direction. 2. Position seal (B) in sleeve. Using hammer, lightly tap seal into sleeve until seal is flush with sleeve. 3. Install lubrication fitting (C) in sleeve. Using 3/8 inch wrench, tighten and position lubrication fitting to face toward center of plate. Go on to Sheet 5 TA148525 7-419