TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 686 of 772
TM 9-2350-260-20-1-2 BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 2 of 6) 2. Using pliers, remove cotter pin (C) and pin (D). Throw cotter pin away. 3. Separate rod (E) from clevis (F). 4. Using 3/4 inch wrench, loosen nut (G). 5. Make position of clevis (F) on brake rod (H). 6. Remove clevis F) and nut (G) from brake rod (H). 7. Using screwdriver, loosen damp (J) on boot and bushing OK). 8. Slide damp (J) off boot and bushing (K) and tachometer cable (A). 9. Using screwdriver, pry boot and bushing (K) out of plate assembly (L) and slide forward on tachometer cable (A). 10. Remove boot and bushing (K). 11. Inspect bushing. If damaged, replace. Go on to Sheet 3 TA148523 7-417