TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 685 of 772
TM 9-2350-260-20-1-2 BULKHEAD PLATE ASSEMBLY REPLACEMENT (Sheet 1 of 6) PROCEDURE INDEX PROCEDURE PAGE Removal 7-416 Cleaning and Repair 7-418 Installation 7-419 TOOLS: Long round nose pliers 3/4 in. combination box and open end wrench 7/16 in. combination box and open end wrench 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 3 in. extension with 1/2 in. drive Flat-tip screwdriver Hammer 1-1/8 in. drive pin punch 3/8 in. combination box and open end wrench Hand grease gun SUPPLIES: Grease (Item 36, Appendix D) Bushing (8720489) Dry cleaning solvent (Item 54, Appendix D) Seal (7748748) (2 required) Cotter pin (MS24665-132) Adhesive (Item 4, Appendix D) Pencil Lockwasher (MS35338-46) (6 required) Gasket (8762310) PRELIMINARY PROCEDURE: Remove flange assembly (page 7-411) REMOVAL: 1. Using 3/4 inch wrench, disconnect rear tachometer cable (A) from adapter (B). Go on to Sheet 2 TA148522 7-416