TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 675 of 772
TM 9-2350-260-20-1-2 ACCELERATOR TUBE ASSEMBLY REPLACEMENT (Sheet 1 of 4) PROCEDURE INDEX PROCEDURE PAGE Removal 7-406 Cleaning and Inspection 7-408 Installation 7-408 TOOLS: 1/2 in. combination box and open end wrench Slip joint pliers 7/16 in. combination box and open end wrench Mechanic's scribe Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N•m) 1/2 in. crowfoot wrench with 1/2 in. drive Hinged handle with 1/2 in. drive SUPPLIES: Cotter pin (MS24665-281) (2 required) Rags (Item 65, Appendix D) Dry cleaning solvent (Item 54, Appendix D) Pencil and paper Lockwasher (MS35338-44) REMOVAL: NOTE Remove fixed fire extinguisher cylinder, if necessary to perform task (page 21-50). 1. Using pliers, remove cotter pin (A) from pin (B). Throw cotter pin away. 2. Remove pin (B) from clevis (C). Go on to Sheet 2 TA148513 7-406