TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 668 of 772
TM 9-2350-260-20-1-2 ACCELERATOR LEVER ASSEMBLY REPLACEMENT (Sheet 1 of 3) TOOLS: Diagonal cutting pliers 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 3/4 in. combination box and open end wrench Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N•m) Vise SUPPLIES: Cotter pin (MS24665-287) Cotter pin (MS24665-281) (2 required) Dry cleaning solvent tem 54, Appendix D) Rags (Item 65, Appendix D) Lockwasher (MS35338-46) (2 required) Bearing (7953936) REMOVAL: 1. Using pliers, remove cotter pin (A) from pin (B). Throw cotter pin away. 2. Remove pin (B) from clevis (C). 3. Using pliers, remove cotter pin (D) from pin (E). Throw cotter pin away. 4. Remove pin (E) from clevis (F). 5. Using pliers, remove cotter pin (G) from nut (H). Throw cotter pin away. 6. Using wrench, remove nut (H), fiat washer (J), washer bearing (K), and lever (L) from support (M). Go on to Sheet 2 TA148506 7-399