TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 663 of 772
TM 9-2350-260-20-1-2 ACCELERATOR PEDAL REPLACEMENT (Sheet 4 of 4) 8. Install pin (J) through lever (K) and clevis (L). 9. Using pliers, install new cotter pin (M) through pin (J). 10. Position cover (N) over rod (D). NOTE If shims were removed, they must be installed at this time. 11. Position bracket (P) on cover (N). 12. Using 9/16 inch wrench, install two screws and new lockwashers (Q) through bracket (P), cover (N), and housing (R). 13. Using 9/16 inch wrench, install two screws and new lockwashers (Q) through cover (N) and housing (R) (hidden). 14. Using 9/16 inch wrench, install two screws and new lockwashers (Q) through housing (G). 15. Install detent plate (S) onto control rod (D) and woodruff key (H). 16. Adjust accelerator pedal (page 7-387). 17. Using 7/16 inch wrench, install new lockwasher and screw (T) to secure detent plate (S) to control rod (D). 18. Install accelerator foot pedal lock assembly (page 7-389). End of Task TA148469 7-394