TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 661 of 772
TM 9-2350-260-20-1-2 ACCELERATOR PEDAL REPLACEMENT (Sheet 2 of 4) NOTE Tag shims which may be located under housings (L) and (M) for installation. 9. Using hammer and punch, remove woodruff key (N) from control rod (C). 10. Remove housing (L) from control rod (C). Using hammer and punch, remove two bearings (L) if bearings are damaged or worn. 11. Using 7/16 inch wrench, remove two screws and lockwashers (Q) securing pedal (P) to control rod (C). 12. Slide accelerator pedal (P) in direction of arrow to allow access to two woodruff keys (R). 13. Using hammer and punch, remove two woodruff keys (R). 14. Slide accelerator pedal (P) off control rod C). 15. Using 9/16 inch wrench, remove screw (S) and nut (T) from accelerator pedal (P). Retain screw and nut for installation onto replacement accelerator pedal. Go on to Sheet 3 TA148467 7-392