TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 656 of 772
TM 9-2350-260-20-1-2 ACCELERATOR PEDAL ADJUSTMENT (Sheet 1 of 1) TOOLS: 9/16 in. combination box and open end wrench (2 required) ADJUSTMENT: 1. Using wrench, loosen jamnut (A) holding stop screw (B). 2. Using wrench, tighten stop screw (B) into accelerator pedal (C). 3. Push and hold accelerator pedal (C) forward as far as it will go. 4. Using wrench, loosen stop screw (B) until It touches hull. 5. Releasing accelerator pedal, use wrench to hold stop screw (B) while using wrench to tighten jamnut (A). End of Task TA148462 7-387