TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 654 of 772
TM 9-2350-260-20-1-2 ACCELERATOR PEDAL RETURN SPRING ADJUSTMENT (Sheet 1 of 2) TOOLS: 7/16 in. combination box and open end wrench Spring scale REFERENCE: TM 9-2350260-10 PRELIMINARY PROCEDURES: Place shift lever in P (park) position (TM 9-2350-260-10) Disconnect accelerator linkage at powerplant (page 7-87, steps 28 and 29) ADJUSTMENT: 1. Using spring scale (A), as shown from behind, check pressure required to depress accelerator pedal (B). 2. Scale should read between 7 and 8 pounds. 3. If scale reads more than 8 pounds, perform steps 5 thru 7. 4. If scale reads less than 7 pounds, perform steps 9 thru 11. Go on to Sheet 2 TA148460 7-385