TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 645 of 772
TM 9-2350-260-20-1-2 ACCELERATOR LINKAGE ADJUSTMENT (Sheet 1 of 8) TOOLS: Long round nose pliers 9/16 in. combination box and open end wrench (2 required) 1/2 in. combination box and open end wrench (2 required) 7/16 in. combination box and open end wrench Flashlight FABRICATED TOOL: Throttle linkage adjusting go/no-go gage (Figure F-3, Appendix F) SUPPLIES: 1/8 in. dia. by 2 by 4 in. long locating pins (2 required) 1/16 in. dia. by 2 in. long pin Cotter pin (MS24665-281) (4 required) PERSONNEL: Two REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURE: Place shift lever in P (park) position (TM 9-2350-260-10) Block tracks to prevent tank movement (TM 9-2350-260-10) Remove upper engine access cover (page 16-44) Go on to Sheet 2 TA148451 7-376