TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 643 of 772
TM 9-2350-260-20-1-2 MANIFOLD HEATER FUEL FILTER, ELEMENT, AND INPUT FUEL LINE REPLACEMENT (Sheet 7 of 8) Fuel Filter Element Replacement (Sheet 2 of 2) WARNING Compressed air used for cleaning purposes will not exceed 30 psi. Use only with effective chip guarding and personal protective equipment (goggles/shield, gloves, etc.). 5. Wipe out bowl (A) and dry with compressed air. INSTALLATION: 1. Position new filter element (C) in filter bowl (A). 2. Position new preformed packing (B) over lip of filter bowl (A) and install to filter head (D). 3. Using wrench, tighten filter bowl (A) to filter head (D). 4. Operate primer pump (TM 9-2350-260-10) and check for leaks. If leak is found, tighten filter bowl. 5. Install lower engine access cover (page 16-46). End of Task TA148449 7-374