Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 623 of 772

TM 9-2350-260-20-1-2 MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2A ENGINE) (Sheet 3 of 3) INSTALLATION: 1. Using 7/8 inch wrench, connect cable (A) to coil (B). 2. Position two clamps (C) onto coil (B). 3. Position coil (B) and clamps (C) on bracket 3. Using 1/2 inch socket and 1/2 inch wrench, install two screws and nuts (D) to bracket. 4. Connect cable (A) to spark plug (E). 5. Using 3/4 inch wrench, tighten cable (A) at spark plug (E). 6. Alining keyway, connect electrical connector (F) to coil (B). 7. Using spanner wrench, tighten electrical connector (F). 8. Perform manifold heater operational check (page 7-324). 9. Install powerplant (page 5-14). End of Task TA148429 7-354