TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 622 of 772
TM 9-2350-260-1-2 MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2A ENGINE) (Sheet 2 of 3) REMOVAL: WARNING Ignition coils on engine are capable of producing extremely high voltage. Output of this ignition system is sufficient to cause a dangerous electrical shock. Never touch any uncovered or live connections. 1. Using 3/4 inch wrench, disconnect cable (A) from spark plug (B). 2. Using spanner wrench, disconnect electrical connector (C) from coil (D). 3. Using 1/2 inch socket, and 1/2 inch wrench, remove two screws and nuts (E). 4. Remove coil (D), lead (A), and clamps (F) as a unit. 5. Remove clamps (F) from coil (D). 6. Using 7/8 inch wrench, disconnect cable (A) from coil (D). INSPECTION: 1. Inspect clamps and coil for cracks or other damage. 2. Check continuity and insulation resistance of cable. 3. Replace faulty parts as required. Go on to Sheet 3 TA148428 7-353