TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 616 of 772
TM 9-2350-260-20-1-2 MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 6 of 7) 5. Using 9/16 inch wrench, install elbow (F) on adapter (G). 6. Using 9/16 inch wrench on elbow (F) and adjustable wrench on tee (H), install elbow (F) on tee (H). 7. Using 1/2 inch wrench, install adapter (G), elbow (F), and tee (H) to solenoid valve (J). 8. Using 9/16 inch wrench, install tube assembly line nut of tube (K) on tee (H). 9. Using 9/16 inch wrench, install line nut of tube assembly (C) on tee (H). 10. Position solenoid valve (J) on bracket (L). 11. Using 5/16 inch wrench, install two screws and washers (M) through bracket (L) and into solenoid valve (J). 12. Using fingers, install grommet (E) in slot of lower engine cooling fan shroud (N). 13. Using both hands, install lower engine cooling fan shroud (N) over mounting holes in engine bulkhead. 14. Using hands, manually install four screws and washers (P) in lower engine cooling fan shroud (N). 15. Using socket and 1/2 inch wrench, tighten four screws and washers (P) in lower engine cooling fan shroud (N). Go on to Sheet 7 TA148422 7-347