Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 613 of 772

TM 9-2350-260-20-1-2 MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 7) 3. Using socket and 1/2 inch wrench, remove four screws and washers (D) from lower engine cooling fan shroud (E). 4. Using screwdriver, remove two screws and washers (F) from lower engine cooling fan shroud (E). (Left screw is hidden. You will have to feel for it.) NOTE Engine cooling fan shroud (E) must be slightly displaced in step 5 to allow clearance for removal of manifold heater return tube (C). 5. Using hammer handle, tap on bottom of engine cooling fan shroud (E). Second person, using screwdriver, pry up on front lip of cooling fan shroud and slightly displace it. 6. Using fingers, remove grommet (G) from tube assembly (C). 7. Using 9/16 inch wrench, remove line nut of tube assembly (C) from elbow (H) on manifold heater (J). Go on to Sheet 4 TA148419 7-344