TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 611 of 772
TM 9-2350-260-20-1-2 MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY REPLACEMENT (Sheet 1 of 7) PROCEDURE INDEX PROCEDURE PAGE Removal 7-343 Cleaning and Inspection 7-345 Installation 7-346 TOOLS: 5/16 in. combination box and open end wrench 8 in. adjustable wrench Flat-tip screwdriver Hammer 9/16 in. combination box and open end wrench (2 required) 1/2 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 1/2 in. combination box and open end wrench SUPPLIES: Rags (Item 65, Appendix D) Sealing compound (Item 27, Appendix D) Dry cleaning solvent (Item 54, Appendix D) Container PERSONNEL: Two PRELIMINARY PROCEDURES: Remove powerplant (page 5-1) Remove engine shroud (page 9-2) CAUTION When removing or installing fuel lines, care must be taken not to damage fittings and threads or twist or distort fuel lines or hoses. NOTE There are two manifold heater fuel return tube assemblies, one for left bank and one for right bank. Removal and installation procedures for both tube assemblies are similar. This procedure covers right bank tube assembly. Go on to Sheet 2 TA148417 7-342